Kessler - KillShock Isolator System

The Kessler KillShock is used to remove camera vibration when shooting from vehicles like cars, boats, or ATVs by isolating shock away from the camera via a set of shock modules. The isolator is based on a set of 8 modules, each containing 3 shock cables per module as it allows for proper weight distribution around the entire surface of the isolator and not just the corners.


The KillShock comes standard with a set of 8 Medium Duty (Red) shock modules pre-installed, but it works with 8, 6, 4 or 3 modules to fine tune for your payload requirements. We also include two additional shock module options; Light Duty (Blue) and Heavy Duty (Black), which can be combined to create the perfect blend of isolation. The KillShock is compatible with a variety of mounting options, and it can even be used in inversion mode with the included Inversion Mounting Kit.


The top plate of the KillShock features numerous mounting options. They include a built-in Mitchell Mount with 4 keyways integrated right into the top plate, a similar center mounting pattern as Kessler's Shuttle Dolly system which allows for a 100mm bowl insert or a cheeseplate insert, as well as built-in mounting points for Freefly's Toad in the Hole, the MoVI XL to Mitchell adapter, and DJI's Ronin 2 Universal Mount. The top plate is also compatible with Kessler's HD Angle Plate to allow for leveling the camera when using the KillShock in Hostess Tray Mode (vertically mounted) or when hard mounting a camera directly. There are also numerous 3/8"-16 and 1/4"-20 tapped holes for mounting accessories like handles as well as tethering and other needs.


The bottom plate features 1” tether strap points which extend away from the base allowing for easy attachment of ratchet straps and safety wire. The bottom plate also features a similar center mounting pattern as the top plate so you can mount the KillShock with the Kessler Mitchell Boss adapter with Castle Nut, Center Cheese-plate or via the 100mm ball mount when combined with the center cheese-plate. The 3/8-16" and 1/4-20" tapped and through holes on the bottom plate allows the mounting of support arms, baby pin to 3/8-16, speed rail clamps, mounting hardware, etc. to mount the KillShock in hundreds of different ways.